Today, I am sharing my experience of what happened in the theater for my last C-Section.
Note: If you are squeamish, I suggest you close this page immediately. The images on this post are not for the faint-hearted.
This post is dedicated to all those who people think that C-Sections are the easy way out!
Choosing to have a C-Section is not the easy way out because honestly there is no easy way out when it comes to giving birth. Giving birth is painful, hard work and beautiful.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/csection-2-1536x1024.jpg)
I admit that I felt cheated after my first C-Section. It wasn’t what I planned and definitely not what I wanted. I tried so hard to have a natural delivery – but it wasn’t meant to be. My water broke without any contractions, and after several hours of waiting for contractions to come naturally, I had to be induced. I eventually ended up having an emergency C-Section because there wasn’t any amniotic fluid left for baby. The second time around, I went with a C-Section because I knew nothing about VBAC. I wish that I had researched it a bit more. That being said – I am not complaining – I am a proud C-Section mom.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/operation-room-1536x1024.jpg)
On the 11th of June 2017, I went into the theater for an emergency C-Section because my water broke. I was 2cm dilated with contractions approximately 10 minutes apart. This was my third and last C-Section. To be honest, I really wanted to try to VBAC2 but it was too risky for me or that’s what I’ve been told because I had my last C-Section less than 2 years ago.
I layed there naked on a hard chair waiting to be cut open in front of a room full of strangers.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/catheter-1536x1024.jpg)
I was scared, excited and nervous!
Nervous about having another C-Section – because we all know that anything can happen during surgery. I was however confident that I had the best doctors operating on me and I could not have asked for a better Gynae.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/doctors-683x1024.jpg)
With a C-Section, your baby is surgically removed through an incision in your abdomen and then a second incision in the uterus. I know that it sounds scary. It looks scary but trust me, 99% of the time you won’t even realize what is actually happening in theater. The doctors do their best to get your mind off what is happening on the operation table.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/c-section-sa-1536x1024.jpg)
What happened Before my C-Section Surgery:
As soon as I went into the maternity ward, I was taken into a room for an examination. I had to change into the fancy hospital gown. The nurse first checked baby’s heartbeat and monitored my contractions then did an internal examination. I was then told to pee in a cup.
Afterward, I was admitted to the hospital and I had to fill out a few documents. While filling out the documents, my blood pressure was checked and then I was given a clear liquid to drink to prepare for surgery.
An IV was placed on my hand to give me the fluids and medications that I would need during surgery.
I was then wheeled into the operating room with my stem cell kit from Salveo. You can read about why I chose to store baby’s stem cells here.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/salveo-south-africa-1536x1024.jpg)
I was then given a spinal block, which numbed the lower half of my body but allowed me to be awake throughout the surgery.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/C-sections-1536x1024.jpg)
A catheter (tube) was placed into my bladder to remove urine, and it remained there for a day after the surgery. My abdomen was washed and cleaned and all was good to go!
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/c-section-south-africa-1536x1024.jpg)
I honestly felt as if I was in an episode of Grey’s Anatomy. We had a nurse present from Salveo, my husband with his video camera and my birth photographer.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/doctors-2-1536x1024.jpg)
How a C-section is done in theater
Your gynae will use a knife to make a horizontal incision in the skin and the abdominal wall, usually along the bikini line, meaning that it’s low enough down on the pelvis that it would be covered up by underwear or a bikini bottom.
Most of the time you don’t feel anything, however, a few women have mentioned that they felt some pain. I didn’t feel any pain but I did feel them tugging and pulling in there. It was weird.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/csection-2-1-683x1024.jpg)
After the abdomen is opened, an incision is made in the uterus. Typically, a side-to-side (horizontal) cut is made, which ruptures the amniotic sac surrounding the baby. Once this protective membrane is ruptured, your baby is removed from the uterus, the umbilical cord is cut, and the placenta is removed.
Your baby is examined by the Paed on call then given back to you for skin-to-skin contact.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/Shaney_C-Section_083-1536x1024.jpg)
The only difference with my C-Section was the stem cell storage process which began before the placenta was taken out. I will share that experience in an upcoming post.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/placenta-1536x1024.jpg)
Dr. Allison Bryant, a maternal fetal medicine specialist mentioned in an article that the cut made to a woman’s uterine wall is an important one because the way this uterine scar heals can affect her ability to have a vaginal birth in the future.
Once the delivery and afterbirth are completed, the cuts made to the mother’s uterus are repaired with stitches, which will eventually dissolve under the skin. The abdominal skin is closed with stitches or with staples.
Typically, you will spend around 60 to 120 minutes in the theater, depending upon whether any complications arise during the delivery.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/recovery-1536x1024.jpg)
After the surgery, you will be taken to the hospital’s maternity ward to recover. At this stage, I was exhausted, high on meds but so in love with my son. I couldn’t stop staring at him. He immediately went on the breast and we spent the next couple of hours bonding skin to skin and breastfeeding.
![theater](https://youbabyandi.com/wp-content/uploads/2017/07/Shaney_C-Section_215-1536x1024.jpg)
My advice to moms who are about to have a C-Section is… Don’t stress yourself and think about it too much. Go in theater positive and enjoy every minute of it because it is your birth experience. Make it special. Every C-Section of mine has a moment that I will always remember – besides that most important moment when I first met my kids. I remember the little things like cracking jokes with the doctors and enjoying my favourite song.
Tip: If you don’t want to see what is happening in theater, don’t look up at the light.
Source for article: www.livescience.com
Special thanks to www.kistphotography.com
- Want to win a Cruise worth R35,000?
- Sun City in Winter? Why not!
- How to Choose Versatile Tops for your Capsule wardrobe
- Panado launches new grape flavour
- What to look out for when purchasing beauty products
![](https://youbabyandi.com/wp-content/uploads/2019/07/JOIN-THE-TRIBE-1.png)
31 comments
I really love your blog, great post, mine is coming up in a few months. Nervous, excited, scared, cant wait.
I agree – not for the faint hearted but you know the main thing is to get that precious baby out. Congratulations!
Copper scrap merchants Copper hydroxide recycling Copper scrap market forecasting
Scrap copper analysis Scrap copper reclamation Copper radiator scrap buyer
Copper scrap sorting technologies Global copper scrap trade Copper scrap waste reduction practices
Aluminium alloy separation Aluminum waste disposal Scrap aluminium pollution control
Metal reutilization Ferrous scrap collection Iron salvage operations
Ferrous material market outlook, Scrap iron recovery center, Metal waste reclaiming solutions
Metal waste disposal center Ferrous scrap brokerage Scrap iron recovery center
Ferrous material collection center, Iron scrap recycling plant, Metal reclaiming and recycling
Metal waste utilization Scrap aluminium import procedures Scrap aluminium secondary markets
Metal recycling procurement, Aluminum cables recycling process, Metal reprocessing plant
Scrap metal logistics optimization Scrap aluminium waste reduction Aluminium recycling processing solutions
Metal waste reclamation facility, Aluminum cable scrap price, Metal recovery and repurposing services
Scrap metal services Aluminium waste disposal regulations Aluminium scrap shearing
Metal utilization, Aluminum cable scrap recycling prices, Scrap metal salvage
Industrial scrap metal pricing Aluminum coil scrap Aluminium recycling certification process
Metal waste recycling depots, Recycled aluminum products from cable scrap, Metal scrap reclaiming facility
Scrap metal disassembly Ferrous material handling procedures Iron reclamation and reprocessing
Ferrous material baling machinery, Iron scrap recycling depot, Metal waste disposal regulations
Metal recovery Aluminium casting recycling Scrap aluminium technological advancements
Metal recyclability, Aluminum cable stripping machines, Metal waste reclaiming
Metal recovery and recycling solutions Ferrous material equipment maintenance Iron scrap recovery strategies
Ferrous material recycling development, Iron scraps reprocessing, Scrap metal appraisal
Scrap metal inspection Aluminium scrap distribution Aluminum scrap sorting process
Metal reprocessing and reclaiming, Aluminum cable weight, Scrap metal commerce
Scrap metal reutilization center Ferrous metal collection Iron and steel reprocessing
Ferrous material satisfaction, Iron waste recovery solutions, Metal reclamation industry
Scrap metal price fluctuations Scrap aluminium price analysis Aluminium scrap lifecycle
Scrap metal sorting, Aluminum cable recycling equipment, Sustainable metal recovery practices
Metal scrap brokering Ferrous material disposal regulations Iron reclaiming solutions
Ferrous material contingency planning, Iron and steel reclaiming and recycling, Scrap metal depots
Metal scrap transportation logistics Aluminium skimmings recycling Industrial aluminium waste solutions
Scrap metal procurement, Scrap aluminum cable sorting techniques, Scrap metal reclamation plants
Scrap metal waste reduction initiatives Ferrous scrap traceability Iron waste recycling solutions
Ferrous material industry representation, Iron scrap inventory services, Scrap metal reclamation processing
Copper oxide recycling Copper scrap price trends Scrap copper yard
Metal reclamation and recovery center, Copper scrap tracking, Metal scrap repurposing services
Copper hydroxide scrap buyer Copper is a widely used metal in various industries, including construction, electronics, automotive, and telecommunications. The price of copper is affected by several factors, including supply and demand, global economic trends, geopolitical events, currency fluctuations, and production costs. Here are some of the key factors that influence the price of copper: 1. Supply and demand: The basic rule of economics states that if the demand for a commodity exceeds its supply, the price will increase. On the other hand, if the supply exceeds demand, the price will fall. The same law applies to copper prices. The demand for copper is high due to its versatile properties, such as its ability to conduct electricity and heat, corrosion resistance, and ductility. The supply, on the other hand, is limited, as copper is a finite resource and mining requires considerable investment. 2. Economic trends: Copper prices are sensitive to changes in the global economy, especially industrial growth. High levels of industrial activity, particularly in emerging markets such as China and India, lead to increased demand for copper, boosting its price. Weak economic conditions can lead to reduced demand, causing the price to dip. 3. Geopolitical events: Political instability, conflicts, and natural disasters can affect the price of copper. For instance, mining operations may be disrupted or halted due to political unrest or natural disasters, leading to reduced supply and increased prices. 4. Currency fluctuations: The price of copper is determined in US dollars. Changes in currency exchange rates can affect demand and supply, and ultimately, the price. For example, if the US dollar strengthens against other currencies, copper prices may increase, as it becomes more expensive for buyers in other currencies. 5. Production costs: Mining copper requires significant investment in exploration, extraction, and processing. The cost of production, including labor, energy, and equipment, can affect the price of copper. If the cost of mining copper increases, producers may need to sell it at higher prices to remain profitable. In conclusion, the price of copper is influenced by a multitude of factors, making forecasting its future price challenging. However, keeping a close eye on trends in supply and demand, global economic conditions, geopolitical events, currency fluctuations, and production costs can provide insights into changes in copper prices Scrap metal volume assessment Circular economy in copper recycling Copper scrap sustainability initiatives Industrial copper reprocessing Copper scrap industry standards Metal waste yard
Metal waste pricing Ferrous material sustainability practices Iron waste recovery
Ferrous material recycling and reclamation, Iron retrieval, Scrap metal recovery and recycling center
Scrap Copper recycling rates Copper is widely used as a conductor of electricity for various reasons. One of the main reasons is its ability to conduct electricity efficiently. Copper has a high electrical conductivity, which means that it can carry electricity with minimum resistance. This is important because when electricity flows through a wire, it encounters resistance which results in energy losses in the form of heat. Copper’s high conductivity helps minimize such losses, making it an ideal choice for electrical wire. In addition, copper is also a ductile metal, which means it can be easily drawn into thin wires without breaking. This property makes it possible to manufacture fine electrical wires that can be used to connect various devices with high precision. Moreover, copper has excellent thermal conductivity, which means that it can conduct heat efficiently. This makes it possible to cool down electrical wires, motors, and other electrical components effectively, preventing them from getting overheated. Copper is also a very reliable metal, and it doesn’t corrode easily, making it an excellent choice for electrical wiring that needs to last for a long time. It is also a highly durable metal that can withstand harsh weather conditions, extreme temperatures, and other environmental factors that could damage electrical wires. Overall, copper is widely used as a conductor of electricity due to its high conductivity, ductility, low resistance, efficient heat dissipation, durability, and reliability. These properties make it an ideal choice for various electrical applications such as power transmission, electrical wiring, electronics, and many more Scrap metal reclamation yard Scrap Copper recycling benefits Scrap copper trade Copper scrap resale value Copper alloy scrap Metal waste sorting center
Copper scrap industry knowledge Copper scrap management solutions Scrap metal buyback
Copper cable recycling business, Metal waste inspection services, Copper carbonate scrap acquisition
Precious metal extraction, Local copper scrap buyers, Copper cable scrap analysis, Metal recycling recovery
Scrap metal reclamation depot Scrap metal reclaiming solutions Iron scrap reclamation facility
Ferrous material demolition, Iron waste management services, Metal scrap salvage
Scrap yard services Ferrous metal recycling process Iron and steel scrapping and recuperation
Ferrous metal balers, Iron scrap drop-off, Metal recycling depot
Scrap metal disposal services Ferrous material waste compaction Iron reprocessing operations
Ferrous metal refurbishing, Iron reprocessing yard, Scrap metal pricing
Metal recycling compliance Ferrous material yard management Iron waste management center
Ferrous material reclamation, Iron waste reusing services, Precious metal extraction
Metal recycling and salvaging Ferrous scrap sustainability Iron recycling and reclaiming solutions
Ferrous material recycling data management, Iron repurposing facility, Scrap metal marketing