This post is about childproofing your home and was written by Guest blogger – Diana Smith.
Everything changes when you have a baby, including your priorities. The child’s safety becomes the most important issue. This means your home will have to undergo some changes as well because from the kids’ perspective it’s a pretty dangerous place.
Before you start childproofing your home it might be a good idea to inspect all rooms and to try looking at them, the way your child does. That way you may spot a dangerous area you didn’t think about before.
Tips on Childproofing your home:
Kitchen
Kitchen knives and forks come to mind as the most obvious safety hazard for kids. You’ll definitely have to keep those locked up or at least somewhere where they can’t be reached, but the dangers don’t stop there. Kitchen range, for instance, is dangerous even when it’s turned off because it usually has a very heavy door which can really hurt a child if they fall over. Add anti-trip brackets or try to get a stove with a sliding door.
Bathroom
Store medicine and other dangerous chemicals usually found in the bathroom away from the reach of children. If you don’t have high shelves in the bathroom invest in safety latches for all the cabinets. The toilet itself is also a safety hazard – children can lean into them and fall in (and drown in a small amount of water). Get the specially made locks for keeping the lid on. Make sure all electronic devices (like hair dryers and electric rollers) are turned off and unplugged when you leave the bathroom. In the end remember that child can get burned much easier than an adult person, so think about getting an anti-scalding device for all the faucets.
Furniture
Depending on how mobile (and crawling becomes standing up pretty fast) your kid is furniture – especially larger pieces – can be pretty hazardous. It’s a good idea to put on protection on the edges of a dining table and not to put pots, especially with something hot in the near the edge. Also make sure that heavy furniture like bookshelves are properly weighted down, so a child can’t flip them over onto themselves.
Gates
If you want to designate whole areas of the house to be restricted zones for children – installing gates are the way to go. They’re mostly used to keep kids away from stairs, kitchens or swimming pools. Be careful when you get gates, because they themselves can pose a danger if not installed correctly. If there is a chance that a gate can be tipped over, don’t get it. Also, accordion style gates are a good place for a kid to get stuck. When choosing a safety lock for your gate make sure it’s something a child can’t open, but you can without too much trouble. If a gate is too difficult for an adult to open, you might get tempted to leave them unlocked when you’re in a hurry.
High tech
There is an app for everything and childproofing isn’t an exception. Technology can be of great assistance when it comes to childproofing. There are baby monitors with cameras which stream directly to your phone. Motion sensors are not that hard to find as well. Also most kitchen appliances are now programmed to turn off as soon as a problem emerges. Never the less all this gadget aren’t a substitute for keeping your eyes open.
Nothing is more important than the safety of your children. When you’re childproofing your home – be methodical, take every precaution and make sure your kids can run around care free.
About author:
Diana Smith is a full-time mom of two beautiful girls interested in topics related to home decor and latest DIY projects. In her free time, she enjoys exercising and preparing healthy meals for her family.
27 comments
Copper scrap rolling Scrap Copper refining methods Copper recycling solutions provider
Copper scrap reprocessing technology Copper scrap grading Copper billet production
Aluminium byproduct repurposing Aluminium scrap regulatory compliance Aluminium recycling waste-to-energy
Scrap yard services Ferrous material recovery yard Iron recycling industry
Ferrous material shredding and shearing, Iron waste recovery solutions, Scrap metal reclamation and utilization
Metal waste reclaiming solutions Scrap aluminium upcycling Aluminium scrap compounding
Metal recycling and rejuvenation, Aluminum cable scrap recycling guidelines, Scrap metal audit
Metal waste inventory services Ferrous material transportation regulations Iron scrap import regulations
Ferrous processing and recycling, Iron waste reuse center, Scrap metal reclaiming yard
Efficient metal scrap handling Aluminum scrap melting Aluminum recycling legal compliance
Scrap metal reprocessing and recovery, Aluminum cable scrap storage methods, Metal logistics services
Metal recovery yard services Ferrous material data management Scrap iron handling
Ferrous material waste elimination, Iron scrap salvage yard, Metal recovery yard services
Scrap metal rejuvenation Ferrous material recycling planning Iron scrap baling
Ferrous material shredding and shearing, Iron recovery depot, Metal scrap recovery facility
Metal waste scrapyard Aluminium scrap environmental impact Aluminum scrap sustainability
Metal market analysis services, Aluminum cable scrap transportation, Scrap metal reprocessing yard
Scrap metal disassembling Ferrous material recycling storage Iron salvaging depot
Ferrous metal recycler, Iron scrap reconstruction, Scrap metal repurposing facility
Industrial metal recycling Ferrous material recycling unit Iron waste restoration
Ferrous material outreach programs, Iron scrap collecting, Scrap metal handling
Scrap metal shipping Aluminium scrap regulatory compliance Aluminum scrap melting
Eco-friendly metal recovery, Selling aluminum cable, Metal reclamation and recovery center
Metal recuperation services Ferrous material recycling agreements Iron scrap removal
Ferrous waste minimization, Iron scrap reprocessing plant, Advanced metal recycling
Scrap metal processing and recycling Aluminium recycling educational outreach Aluminium recycling compliance standards
Metal waste disposal, Aluminum cable disposal, Metal reprocessing facility
Metal waste reclaiming and reprocessing Aluminium scrap entrepreneurship Scrap aluminium price trends
Transport regulations for scrap metal handling, Reducing landfill waste with aluminum cable scrap recycling, Metal reclaiming processing
Scrap metal reclamation and recycling facility Ferrous material recycling storage Iron waste reclaimer
Ferrous material recycling seminars, Iron scrap residue, Metal scrap brokering
Metal recycling processing Ferrous material recycling standards adherence Iron reprocessing operations
Ferrous metal warehousing, Iron scrap removal, Metal reclaiming and reuse
Scrap metal price volatility Ferrous material innovations Iron scrap compaction
Ferrous metal recycling analysis, Iron scrap recycling facility, Scrap metal reclaiming and reprocessing
Copper scrap export documentation Copper scrap recycling infrastructure Copper scrap grading
Metal waste reclaiming center, Scrap copper inspection, Scrap metal repurposing center
Scrap Copper collection Copper can turn green due to a process called oxidation, which occurs when copper reacts with oxygen in the air and forms copper oxide. This green layer, also known as patina, can be prevented with the following steps: 1. Keep copper dry: Moisture can speed up the oxidation process and cause copper to turn green faster. Dry your copper items thoroughly after use. 2. Apply a protective coating: Wax, oil, or lacquer can protect copper from air exposure and prevent oxidation. Apply a thin coat of protective coating to your copper items regularly. 3. Store copper properly: Store copper in a dry and cool place, away from direct sunlight or moisture. Wrap or cover your copper items with a cloth or paper towel to prevent scratches or dust accumulation. 4. Clean copper regularly: Regular cleaning can help prevent oxidation and keep copper shiny. Use a soft cloth and mild soap and water to clean copper items, and dry them thoroughly afterwards. By following these steps, you can help keep your copper items from turning green and maintain their shine and beauty over time Metal recycling and reclaiming Local copper scrap buyers Copper scrap safety standards Copper scrap purity testing Industrial copper recycling solutions Scrap metal refabrication
Copper scrap recycling certifications Copper electrical connectors play a crucial role in the safe and effective functioning of electrical systems. Here are some best practices to follow when working with copper electrical connectors: 1. Choose quality connectors: It is important to choose high-quality connectors that are rated for the specific application and meet the necessary standards. This ensures that the connectors can withstand the electrical load and environmental conditions. 2. Strip wires properly: The insulation on wires needs to be stripped properly before connecting them to the copper connector. Over-stripping or under-stripping can lead to poor conductivity or damage to the connector. 3. Use appropriate tools: Use the appropriate tools for crimping or soldering the connector to the wire. This helps to ensure a secure and reliable connection. 4. Follow manufacturer’s instructions: Always follow the manufacturer’s instructions when installing the copper connectors. This ensures that they are installed correctly and perform as intended. 5. Check for corrosion: Copper connectors are susceptible to corrosion, which can impact their performance. Regularly inspect the connectors for signs of corrosion and replace them as necessary. 6. Use protective coatings: Depending on the environment, it may be necessary to use protective coatings on the copper connectors to prevent corrosion or damage. 7. Practice safety precautions: Always follow safety precautions when working with electrical systems and copper connectors. This includes turning off the power supply, wearing appropriate personal protective equipment, and working with a partner when necessary. Following these best practices when working with copper electrical connectors can help ensure the safety and reliability of electrical systems Metal reclaiming and repurposing services Secure copper scrap disposal Scrap copper market trends Copper scrap customs clearance Copper scrap recycling companies Scrap metal waste
Scrap copper annealing Green copper recycling Scrap metal recovery and salvage
Copper cable scrap recovery, Metal salvage yard solutions, Certification for copper scrap buyers
Scrap metal processing facility, Copper scrap sorting and grading, Copper cable recycling prospects, Recycling process optimization
Metal waste transportation services Scrap metal reclaiming operations Iron scrap dismantling services
Ferrous scrap recollection, Iron recovery and recycling center, Metal waste reutilization
Metal scrap recovery solutions Ferrous waste salvaging Iron scrap pricing
Ferrous scrap energy efficiency, Iron reclaiming center, Metal recycling best practices
Scrap metal reclamation and reutilization center Ferrous material exports Iron and steel recovery and recycling
Ferrous metal scrapping, Iron scraps reclamation, Scrap metal reclamation and recovery center
Metal waste recovery Ferrous metal trade Iron reclaimer
Ferrous material brokering, Iron redistribution, Scrap metal market analysis